All about our fully refurbished scrubber dryers
A refurbished scrubber dryer can be one of the most economical ways to keep your facility clean, provided the refurbishment has been carried out properly. Here is what genuine refurbishment involves, what to expect from a machine rebuilt to a high standard, and why it often makes more commercial sense than buying new.
What is a fully refurbished scrubber dryer?
A fully refurbished scrubber dryer is a used machine that has been professionally stripped back, rebuilt, and restored to a condition that matches, or closely approaches, that of a new machine. It is not a used machine that has been cleaned up and relabelled.
Genuine refurbishment is a structured, documented process that addresses every worn component, every degraded consumable, and every mechanical or electrical issue the machine has accumulated during its working life.
The distinction matters because the market has no shortage of used machines described loosely as “refurbished” where the work amounts to little more than a service and a fresh coat of paint. A truly refurbished machine is a different proposition entirely.
How do we select a scrubber dryer for refurbishment?
Not every machine is a candidate for refurbishment. Before any work begins, we carry out a thorough assessment to determine whether the machine is structurally sound and worth rebuilding. Chassis integrity comes first.
If the frame is compromised, no amount of component replacement will produce a reliable outcome. We then look at the main drive and scrub motors, the control systems, and the overall build quality.
We work predominantly with machines from manufacturers we know well, Nilfisk in particular. Machines with strong parts availability, proven build quality, and a reliable track record are the ones that make sense to refurbish.
Older machines from obscure manufacturers, or those with fundamental design flaws, are declined. The goal is to produce something we can stand behind with a warranty, and that starts with choosing the right base machine.
How do we refurbish a scrubber dryer?
The machine is stripped to the chassis. Every panel is removed, all assemblies separated, and every component inspected individually. This is not a service procedure. It is a rebuild from scratch.
What happens next depends on what the assessment reveals, but the process consistently covers the following:
All worn mechanical components are replaced: squeegees, seals, drive belts, wheels, and any fixings showing fatigue or corrosion
Electrical systems are tested and repaired or replaced where needed, including wiring looms, switches, and control boards
Batteries are replaced with new units, not reconditioned, but new batteries fitted to the manufacturer’s specification
New brushes and pads are fitted as standard
New filters are fitted throughout
The solution tank, recovery tank, and associated pipework are all cleaned, tested under pressure, and replaced where necessary
The machine is reassembled, tested under load, and adjusted until it performs correctly
Where appropriate, panels and bodywork are refinished
No machine leaves without passing a final operational check. It will have a minimum 2-hour run test under normal operating conditions to ensure quality & consistency of the refurbished machine
What can you expect from a fully refurbished scrubber dryer?
When you take delivery of a CFM North East refurbished scrubber dryer, you are receiving a machine that has been stripped to its chassis and rebuilt with new components throughout. The key points:
The chassis and main structural frame have been assessed and confirmed sound
All worn parts have been identified and replaced, not patched
New batteries are fitted as standard, backed by a 12-month battery warranty
New brushes and filters are supplied and fitted
The machine carries a full warranty covering parts and labour
It arrives ready to work with no initial servicing required
The standard of performance should not feel like a compromise. These are working machines rebuilt for continued working life, and they are supplied on that basis.
Financial and cost benefits of a fully refurbished scrubber dryer vs new
The cost of a new mid range pedestrian scrubber dryer typically starts from £3,000–£4,000 and rises quickly for larger or more capable models. Industrial rider machines can run to £20,000 or beyond. For operations running equipment intermittently, or those with tight capital budgets, that is a significant outlay for a depreciating asset.
A fully refurbished machine from CFM North East is typically available at 40–60% of the equivalent new machine cost, while delivering comparable operational performance and backed by a genuine warranty. That difference in capital cost can be material: it may mean being able to afford the right size machine rather than settling for a smaller one, or equipping multiple sites rather than one.
Running costs are comparable to new. New batteries, brushes, and filters mean consumable expenditure follows the same pattern as a new machine. And because the machine has been properly rebuilt rather than patched, the risk of early breakdown is significantly lower than with an untouched used machine.
For operations where cleaning equipment is a cost centre rather than a differentiator, a fully refurbished machine often represents the most commercially sensible route.
Why choose a CFM North East fully refurbished scrubber dryer?
We have been in this industry for over 25 years. We know these machines, how they work, how they fail, and what a genuine rebuild looks like. That knowledge underpins every refurbishment we carry out.
As an approved Nilfisk supplier, we have access to genuine parts and the technical documentation to do this work properly. We are not buying in machines, cleaning them up, and reselling them with a warranty that offers little real protection. Every refurbishment is a structured process, carried out on machines we have assessed, using parts we trust, to a standard we are prepared to support.
Every refurbished scrubber dryer we supply comes with:
A full machine warranty
12 months battery warranty
New brushes and filters fitted as standard
After sales support from a team that knows the equipment inside out
We cover Yorkshire, the North, and beyond, meaning local support when you need it rather than reliance on a distant service centre.
If you are weighing up the options for your next scrubber dryer, whether new, hired, leased, or refurbished, speak to us. We will give you a straight answer on what makes sense for your operation and budget.
