Nilfisk R305 V Industrial Vacuum

For hygiene, quality, and safety when extracting trims from production lines

The Nilfisk lateral trim vacuums, commonly known as the R Models, are used to extract trim (paper, plastic, fabric, etc.) from production lines. Suction power, construction features and dimensions are therefore tailored according to the production machines they need to serve.

The R models are available in five versions, from 0,85 to 4,0kW, with containers in 460 and 560mm diameter (total capacity of 114, 150 or 215 litre). The standard versions are equipped with a nylon liner filter; special liners are available for powder extraction. The suction unit, a three-phase continuous duty motor, is placed directly under the container. Thanks to the motor position, the liner is spread out and completely open and all product vacuumed in is neatly compacted on the bottom, optimising the container capacity. To empty simply open the lid and remove the liner. All the models are available in the painted and stainless steel AISI 304 versions. A 4 kW multi-stage blower in parallel connection is also available (model 3507W R). All the R models are ideal for automated applications (no need for the operator).

• Small footprint
• Maintenance free
• Very quiet
• Easy and quick disposal of waste material
• High volume capacity
• Quick visual level control: plexiglass port hole in the lid
• Specific liner filter for fine dust is also available

• Voltage V 400
• Airflow without hose m³/h-l/m           306-5100
• Max. vacuum kPa-mbar          31-310
• Sound Pressure Level at 1.5m dB(A) 75
• Container Capacity      L 150
• Main Filter Area cm² 14350
• Frequency Hz 50
• Main Filter Type NYLON MOD. R560
• Insulation Class F
• Inlet mm 50
• IP Protection Class       55
• Rated Power    kW 2.2
• Length x Width x Height cm 66 x 66 x 125
• Weight Kg 61

ACCESSORY KITS ARE AVAILABLE IF REQUIRED.

Contact Us